***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 06, 2025 2:15 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
Jimmyjames
 Post subject: How are pickguards made?
PostPosted: Thu Apr 30, 2015 1:04 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Mar 24, 2015 4:46 pm
Posts: 254
I want to make a clear, with Dalmatian style dots, pickguard. I haven't found any I like for sale. I don't want the yellow parts to be tinted, they must be clear.

Any suggestions of how to do this?

Thanks,

-j


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Bill Hodge
PostPosted: Thu Apr 30, 2015 1:38 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Mar 18, 2009 6:27 pm
Posts: 1246
Location: Arkansas, USA
First name: Bill
Last Name: Hodge
Country: USA
Focus: Build
Status: Professional
If you're of a mind to make one 'completely' from scratch, you could follow the ideas in this tutorial below. Rather than an amber epoxy, use one that's truly clear like what they use in arts and crafts. There are also 2 part urethanes that dry beautifully clear.

viewtopic.php?f=10101&t=29959&hilit=epoxy+pickguard

_________________
Bill Hodge


One does not simply, own enough guitars!


These users thanked the author Bill Hodge for the post: Jimmyjames (Thu Apr 30, 2015 2:25 pm)
Top
 Profile  
 
Jimmyjames
PostPosted: Thu Apr 30, 2015 2:26 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Mar 24, 2015 4:46 pm
Posts: 254
Bill Hodge wrote:
If you're of a mind to make one 'completely' from scratch, you could follow the ideas in this tutorial below. Rather than an amber epoxy, use one that's truly clear like what they use in arts and crafts. There are also 2 part urethanes that dry beautifully clear.

viewtopic.php?f=10101&t=29959&hilit=epoxy+pickguard


This is great, thank you!

-j
Top
 Profile  
 
Glen H
PostPosted: Thu Apr 30, 2015 2:39 pm 
Offline
Koa
Koa

Joined: Mon Jul 11, 2005 5:17 am
Posts: 1013
Location: United States
City: Tyler
State: Texas
I spent a lot of time trying the same as in the tutorial, but darn I could never keep the dust out. I tried in my house in a clean room, just never could get them done without specs of dust in them. If you figure out how to keep the dust out, fill me in please!
Top
 Profile  
 
Jimmyjames
PostPosted: Thu Apr 30, 2015 2:48 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Mar 24, 2015 4:46 pm
Posts: 254
I'm also curious about the celluloid type. How is that type made?

Dust is a problem. Hmmm... ?
Top
 Profile  
 
DennisK
PostPosted: Thu Apr 30, 2015 3:03 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3605
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
I attempted one of these a while back too, but got bubbles in it, and it never got all that hard or stiff. I must have gotten the epoxy mix wrong (StewMac slow epoxy). I also swirled it with a toothpick, which left rumply lines in the shrinkwrap under it, and thus imprinted in the epoxy... be gentle if you use a toothpick.

One trick I heard to get rid of bubbles is to heat it up. I haven't actually tried it, but I would expect it to make the epoxy less viscous, and the bubbles expand and float up better. Might still need to poke at some of them though.
Top
 Profile  
 
SteveSmith
PostPosted: Thu Apr 30, 2015 4:07 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7432
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
used to use epoxy for potting electronic assemblies at work. We had to use vacuum to get the bubbles out.

_________________
Steve Smith
"Music is what feelings sound like"
Top
 Profile  
 
Bill Hodge
PostPosted: Thu Apr 30, 2015 4:28 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Mar 18, 2009 6:27 pm
Posts: 1246
Location: Arkansas, USA
First name: Bill
Last Name: Hodge
Country: USA
Focus: Build
Status: Professional
I tried it once and managed to 'lose' the bubbles by using a headset magnifier and a needle. However, after it cured I managed to break it while prepping it for the guitar. Haven't tried the urethane method yet because I find that buying pre-made sheets and cutting them with my own templates is far more time (thus cost) efficient. At least in my own production environment.

Glen H, I had no problem with dust but I used a 15 min epoxy. So......

_________________
Bill Hodge


One does not simply, own enough guitars!


Top
 Profile  
 
Barry Daniels
PostPosted: Thu Apr 30, 2015 6:52 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3267
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Heat it up by placing a lamp just above the surface of the epoxy. The bubbles come right up to the surface and pop.
Top
 Profile  
 
John Arnold
PostPosted: Fri May 01, 2015 1:03 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Sep 08, 2010 12:17 am
Posts: 1290
First name: John
Last Name: Arnold
City: Newport
State: TN
Zip/Postal Code: 37821
Country: USA
Focus: Repair
Status: Professional
Quote:
I'm also curious about the celluloid type. How is that type made?


IMHO, celluloid is the most beautiful, but making it at home is a no-go.

I used to hand paint pickguards. The base I used is 0.020" thick clear rigid vinyl. The color spots are lacquer that is tinted with lacquer/oil soluble aniline dye. The spots are painted on the backside of the pickguard with a brush. Then, clear lacquer is sprayed over the spots to 'fuzz' the edges and seal in the color. Spraying the clear lacquer was the critical step. Too much or too fast, and the color spots would run together. Too little, and the patterns would be too distinct and artificial looking. If I wanted the open areas to be amber, then I would spray amber tinted lacquer next, followed by more clear.

Image

Image

Image

Image

_________________
John


These users thanked the author John Arnold for the post: Jimmyjames (Fri May 01, 2015 3:24 pm)
Top
 Profile  
 
Jimmyjames
PostPosted: Fri May 01, 2015 3:33 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Mar 24, 2015 4:46 pm
Posts: 254
John Arnold wrote:
Quote:
I'm also curious about the celluloid type. How is that type made?


IMHO, celluloid is the most beautiful, but making it at home is a no-go.

I used to hand paint pickguards. The base I used is 0.020" thick clear rigid vinyl. The color spots are lacquer that is tinted with lacquer/oil soluble aniline dye. The spots are painted on the backside of the pickguard with a brush. Then, clear lacquer is sprayed over the spots to 'fuzz' the edges and seal in the color. Spraying the clear lacquer was the critical step. Too much or too fast, and the color spots would run together. Too little, and the patterns would be too distinct and artificial looking. If I wanted the open areas to be amber, then I would spray amber tinted lacquer next, followed by more clear.

Image

Image

Quite impressive!

I'm thinking celluloid is the way to go since it does have a depth that I won't be able to achieve at home. The problem here is I can't find any for sale in a Dalmatian pattern. Even settling for one that isn't clear I found nothing after extensive searching. There's big suppliers out there but they don't usually sell small quantities to individuals. So I'm back at square one. I may try making my own anyway.

Where can one get a small quantity of celluloid in a Dalmatian pattern?

Image

Image
Top
 Profile  
 
Ruby50
PostPosted: Sat May 02, 2015 8:34 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
I am currently installing a purfling of gold glitter sijilar to the ones that Gibson did on a couple of fancy guitars in the 90's. I am using a clear epoxy from Michaels's craft store (no affiliation, yada, yada, yada) and the bubbles come right out of it with a touch of heat from a hair dryer.

Also, Todd Cambio of Fraulini (.com) guitars makes recessed pickguards, and he cuts pearl, glues it into the recess, pours the pickguard, and sands it flush - voila - perfect fit.

Ed
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: Bing [Bot], stumblin and 19 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com